We all know about golf, the way it’s played and the equipment required along with a golf cart. Golf carts are particularly designed for the sport and don’t function like normal vehicles but they still require maintenance and repairs. Therefore, it is essential to carry a floor jack in your golf cart in case something comes up, such as a flat tire.
As mentioned above golf cars are not in any way similar to the vehicles that we use to commute or for other purposes. Thus, the floor jack that you use for your sedan may not be the right fit for your golf cart.
There is a wide variety of products available on the market but not a single one says anything about a golf cart. To understand how to pick the right tool that would get the job done, you need to look into some technical details.
However, in this article, we have listed the best floor jacks available in the market to help you make the right purchase decision.
1. K Tool International 3 Ton Aluminum Floor Jack
Our top pick is a 100% pure aluminum-made floor jack from K Tool. It has a load-bearing capacity of 3 Tons while weighing only 58 pounds. The double piston pump action takes only 7 strokes for the jack to reach the top height of 19.25 inches without load and has a minimum height of 3.75 inches.
A rubber pad is installed on the saddle to prevent marring of the surface and the lift arm is covered with a foam bumper that prevents vehicle damage during close operations. For easy positioning of the device two D-handles are available on either side, which makes it easier to lift and store the jack when the job is done.
This amazing lightweight floor jack is covered with a 2-year warranty from the manufacturer.
What we like
- 3-ton load capacity
- Heavy-duty aluminum made
- Dual pump system
- Lightweight
- Rubber coated saddle and foam bumper on the lifting arm
- 3.75 – 19.25 inches lifting range
- 2-year warranty
What we didn’t like
- Lifts a bit slowly when fully loaded
2. Arcan 2 Ton A20015 / XL20 Floor Jack
Runner up is Arcan A20015/XL20, a 2-ton low-profile floor jack built with sturdy steel for durability and sturdiness. The pump system comprises dual pistons for quicker and strong operations.
The handle is covered by a foam bumper for the protection of your vehicle and it comes off into two pieces which makes storage easy. Speaking of easy storage, the device is made light in weight, and with the swivel caster on the rear moving it around is effortless.
It is made safe and easy to use even for a layman. Equipped with an overload valve that prevents loading the jack above the max capacity. The safety features also include a bypass valve that protects the ram from being over-extended. The saddle has a rubber pad on it making the contact point firm and harmless.
The product comes with a 12-month warranty from Arcan and meets the safety standards of ASME PALD 2009.
What we like
- 2-ton load capacity
- Sturdy steel construction
- Dual pump system
- Rubber coated saddle and foam bumper on the handle
- 2 piece handle for easy storage
- over-extension and overload safety
- Meets ASME PASE-2014 standards for safety
- 1-year parts warranty
What we didn’t like
- Leakage issues
3. Sunex 6603ASJ 3 Ton Floor Jack
Sunex 3 Ton floor jack is another heavy-duty device on our list constructed with high-quality aluminum. It has thick side frame plates and reinforced lift arms for durability and to prevent chassis torsion.
The dual pump pistons make the saddle rise rapidly to the load and reach the max height in just 7.5 pumps. The lifting range is 3.8 inches to 19.3 inches which is ideal for lifting a golf cart. Overload and bypass valves protect the ram from being over-extended or overloaded.
Positioning and carrying the device around is easy with the side-mounted handles. The wide wheel track offers better maneuverability.
The saddle is rubber padded and the handle is covered by a foam bumper for protection of the vehicle. The handle comes off in two pieces to make storage easy.
What we like
- 3-ton load capacity
- Lightweight
- Sturdy construction
- Dual-piston pumping
- Hight lifting range
- Overload and over-extension safety
- Rubber padded saddle and foam bumper handle
What we didn’t like
- Brittle caster wheels
4. JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack
JEGS 3-ton low profile floor jack is a phenomenal device, suitable for lifting heavy loads. It has a wide lifting range from 3.5 inches to 19.25 inches which is suitable for a golf cart.
It has a wide wheel track that ensures better maneuverability and provides stability during the operation. Dual side handles make positioning easy in tight spaces and carrying the device around effortless. There’s an optional jack skid with the package, which comes in handy while using the jack on grass or some uneven surface.
This handle is made longer to increase the moment arm and reduce effort. It’s a two-piece handle that makes storage easy and is covered with a rubber bumper for protection against vehicle damage. The saddle is rubber padded with a unique 360-rotating design.
Equipped with overload and overextension safety mechanism to protect the vehicle and the user from any hazard during heavy operations. The device meets the safety standards of ASME and PALD 2014.
What we like
- 3-ton load capacity
- Sturdy and durable
- High lifting range
- Rubber saddle pad and foam bumper handle
- Two-piece handle and 2 side-mounted handles
- Over-load and over-extension safety
What we didn’t like
- Weighs more than other same size floor jacks
5. Powerbuilt 2 Ton Triple Lift Floor Jack
This is a safe multipurpose jack from Powerbuilt. The 2-ton triple lifting floor jack replaces multiple jacks and fits various kinds of vehicles including motorcycles. You don’t even need a jack stand if you own this amazing device, just slide the provided safety bar into the lift position.
It has a lifting range of 5.5 inches(without the round saddle) to 17.5 inches with the round saddle installed. The stability is beyond comparison, it’s more stable than any of the competitors in the market due to the wide wheelbase the package includes tie-down loops for securing loads.
The removable saddle and padded lift rails are patented, which makes the jack suitable to fit any kind of golf cart there might be. Powerbuilt has constructed this triple lift floor jack to meet the ASME and PALD safety standards.
What we like
- 2-ton load capacity
- Metallic-fiber construction
- Multipurpose
- Ultra-stable and secure
- Removable rubber saddle
- Rubber padded lift rails
- ASME/PALD approved
What we didn’t like
- Issues with lowering the ram when loaded
6. Performance Tool W1627 3.5 Ton Floor Jack
This one is not a lightweight jack, weighs around 85 pounds. The performance tool W1627 is heavy compared to the competitors but can lift about 7000 pounds. Although high-quality steel construction adds a couple of extra pounds to the device, considering the lifting capacity the design looks pretty compact.
It’s a low-profile jack that fits under tight spaces easily and the swivel casters on the back provide better maneuvering. The long frame design adds stability to the device and easily reaches the center of a vehicle. It can lift 20.5 inches high with a strong dual-piston pumping system.
W1627 has everything you need from a floor jack for your golf cart. All these features at such a moderate price are the reason why you would often find this floor jack in a mechanical workshop being used by a professional.
What we like
- 3.5-ton load capacity
- Sturdy and durable
- Steel construction
- Dual-piston pumping
- Rubber saddle pad and foam bumper handle
- Overload and over-extension protection
- Wide lifting range
What we didn’t like
- Swivel casters are stiff
- Heavier than competitors
7. Torin BIG RED T815016L Hydraulic Low Profile Racing Floor Jack
The BIG RED T815061L could be the right fit for those who don’t want to spend much on a maintenance tool. For such a cheap price it is an amazing device that doesn’t lack any of the features. With a load capacity of 1.5-ton, it will work perfectly with a golf cart.
Despite being light in weight the floor jack is strong and sturdy due to the high-quality aluminum and steel used in the construction. The lift range is 3.5 inches to 14 inches and uses two pistons to pump the load quickly to the max height.
Equipped with a safety feature that protects the device against overload. The rubber padded saddle protects frame rails from bending and the handle is covered with a foam bumper which keeps your vehicle safe during close operations.
A handle is mounted to the side for the ease of positioning and carrying the device.
What we like
- 1.5-ton load capacity
- High-quality aluminum and steel construction
- Lightweight
- Dual-piston pumping
- Stable and sturdy
- Non-slip knurled side handle
- Overload safety
- Rubber padded saddle and foam bumper on the handle
What we didn’t like
- Leakage issues
8. Torin T84025B Hydraulic Low Profile Racing Floor Jack
T84025B is another heavy-duty floor jack from Torin that made it to our list. The lightweight design makes it ideal for using in the garage or carrying along with you in the golf cart. Although light in weight has a load capacity of 2.5-ton and is constructed with high-quality steel and aluminum.
It has a wide lifting range of 2.5 inches to 17.7 inches that allow access under vehicles with lower ground clearances, making the placement on the undercarriage quite easy. Uses dual-piston pumping and takes only 7 strokes to reach the maximum height.
The dual side handles make positioning and carrying the device around pretty simple. A built-in overload safety system prevents use beyond the max load capacity. The handle is covered with a foam bumper that prevents vehicle damage during operation.
What we like
- 2.5-ton load capacity
- Lightweight
- Sturdy and durable
- Wide lift range
- Reaches max height in 7 strokes
- Dual-piston pumping
- Overload protection
- Rubber saddle and foam bumper on the handle
- Side handles for easy storage
What we didn’t like
- Small saddle
- Leakage issues
9. Blackhawk B6350 Fast Lift Floor Jack
B6350 is an extremely powerful and heavy-duty floor jack from Blackhawk with a load capacity of 3.5-ton. Its sturdy steel construction makes it safe for lifting heavy loads and ensures long-term durability. It reaches the maximum height of 22 inches, which is exceptional compared to the competitors while having a minimum height of 5.5 inches that would be suitable for any standard golf cart.
Features a built-in bypass device that prevents over-extension of the ram, an internal safety valve, and a vent plug that prevents loading the jack above load capacity. The swivel saddle makes positioning easy and safe operations. A rugged universal joint helps control the load precisely.
Along with the other safety features, a rubber bumper is installed on the handle for the protection of your vehicle. This product is covered by a 1-year warranty from the manufacturers.
What we like
- 3.5-ton load capacity
- Alloy-steel construction
- Swivel rubber saddle
- Foam bumper on the handle
- Internal safety valve and vent plug
- Over-extension safety
- Precise load control
- 1-year warranty
What we didn’t like
- Poor instructions
- Very heavy unit
10. Pro-Lift F-767 Low Profile Floor Jack
Last on our list is this extra low-profile floor jack from Pro-lift called F767. Constructed from sturdy alloy steel for durability and strength, has a load capacity of 2-tons. Safety release valves make lowering the weight safe and easy for the user.
The lift range is from 3.5 inches to 14 inches, though sliding the jack under low-profile vehicles isn’t a problem. This jack is very light in weight and functions as a jack stand that could be easily carried around and stored in your golf cart.
The safety features not only include the release valve but a bypass device that prevents the ram from overpumping. A built-in safety valve is installed for overload protection.
Comes with a 2-year limited warranty from Pro-Lift.
What we like
- 2-ton load capacity
- Alloy steel construction
- Sturdy and durable
- Overload and over-extension protection
- Cheap in price
- A release valve for safety
- 2-year warranty
What we didn’t like
- Heavy
- Small lifting plate
- Releasing valve doesn’t work fine
Buyer’s Guide For Golf Cart Floor Jacks
Golf is a posh sport, people who play the sport are usually the ones that don’t have enough time to worry about little details and look into something as trivial as a right floor jack for their golf cart. But not having the right maintenance tool can cause a lot of trouble and waste of time.
For your convenience, we have created this buyer’s guide that would help you understand the features to be taken into account while making a purchase.
Load Capacity
The most important thing to keep in mind when buying a floor jack is the load capacity and it’s ideal to purchase a device that exceeds the weight of your vehicle.
Groud clearance of your golf cart
Golf carts are not built the same way as conventional cars are, they usually have higher ground clearances while having a footrest attached to the body most of the time. With that in mind, it would be suitable to get a low-profile device that could slide underneath the vehicle easily.
Lifting height
As mentioned above, the ground clearances are usually high in golf carts. So, having a jack that has a high lifting capability is essential to lift the vehicle for any maintenance or replacement.
Durability
Make sure that the construction is strong and the material used is high-quality. If that’s not the case, it can be dangerous for you and your vehicle.
Saftey
There are a lot of risks involved in using a mechanical device to lift heavy loads, therefore, having some safety features on the device such as overload protection, bypass valves and a foam bumper on the handle would be beneficial.
Ease of storage
For you to carry it around the garage or storing inside the vehicle with you, make sure that it’s light in weight. Floor jacks with two-piece handles and side-mounted handles are great in this matter
FAQs
What kind of floor jack do you use on a golf cart?
Any floor jack could be used on a golf cart as long as it is low-profile enough to slide underneath, has a high lifting range, and has enough load capacity to lift the vehicle.
How do I know what size floor jack to buy?
Read the vehicle’s user manual and find out the curb weight and be sure to get some more weight lifting capacity than required.
Why is my floor jack not lifting?
If the floor jack is pumping properly but not lifting the saddle, make sure the release valve is tight and the device is bled properly.
What is the primary safety precaution when using a floor jack?
Before using the jack check its load capacity and that it’s not being overloaded. The hydraulic jacks are designed to lift weights not hold, use jack stands once you have lifted the load. Don’t walk and crawl under a hydraulic jack and make sure to change the oil regularly.
Conclusion
Floor jacks are designed to lift heavy loads in general from cars, trucks, SUVs, and motorcycles to engines and transmissions. If you look on the internet for a floor jack that says golf carts or any other particular vehicle it would be pretty hard to find one that way.
All you need to do is go through your vehicle’s user manual to pull some basic information like ground clearance and curb weight, then simply pick any of the devices mentioned in this article that suits your vehicle. Hopefully, the article would help you understand the features you need in a floor jack to work perfectly with your golf cart.